PCV VALVE INSTALLATION

PROCEDURE

1. INSTALL VENTILATION VALVE SUB-ASSEMBLY

   
   

   1. Apply adhesive to 2 or 3 threads of the ventilation valve sub-assembly.

      Adhesive
      Toyota genuine adhesive 1324, three bond 1324 or equivalent

   2. Using a ball joint lock nut wrench (22 mm), install the ventilation valve sub-assembly.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a ball joint lock nut wrench Click here.

   3. Install the ventilation hose to the valve and intake manifold.

2. INSTALL NO. 1 ENGINE UNDER COVER

3. INSTALL AIR CLEANER CASE

   Click here

4. INSTALL INLET AIR CLEANER ASSEMBLY

   Click here

5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here

6. INSTALL NO. 2 CYLINDER HEAD COVER

   Click here