ELECTRICAL KEY OSCILLATOR(for Instrument Panel Side) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

    Click hereClick here

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (except Manual Transaxle)

    Click hereClick here

  3. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY

    Click hereClick here

  4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)

    Click hereClick here

  5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (except Manual Transaxle)

    Click hereClick here

  6. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH

    Click hereClick here

  7. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH

    Click hereClick here

  8. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click hereClick here

  9. REMOVE CONSOLE BOX CARPET

    Click hereClick here

  10. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click hereClick here

  11. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

    Click hereClick here

  12. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click hereClick hereClick here

  13. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

    1. Disconnect the connector.

      B335762C01

      *A

      LHD

      *B

      RHD

    2. Detach the clamp and remove the No. 1 indoor electrical key antenna assembly.