IGNITION SWITCH REMOVAL

PROCEDURE

1. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

2. REMOVE METER HOOD SUB-ASSEMBLY

   Click here

3. REMOVE INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)

   Click here

4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)

   Click here

5. REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT

   Click here

6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

   Click here

7. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY (w/ Knee Airbag)

   Click here

8. REMOVE LOWER STEERING COLUMN COVER

   Click here

9. REMOVE UPPER STEERING COLUMN COVER

   Click here

10. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY

    
    

    1. 

       Disconnect the connector.

    2. Remove the 2 screws, and remove the ignition switch.