FRONT BRAKE DISASSEMBLY

PROCEDURE

1. REMOVE CYLINDER BOOT

   1. for Type B:

      1. 

         *a	Protective Tape

         Using a screwdriver with its tip wrapped with protective tape, remove the set ring and cylinder boot from the front disc brake cylinder.

         Note:

         Be careful not to damage the front disc brake cylinder.

2. REMOVE FRONT DISC BRAKE PISTON

   1. 

      *a

      Cloth

      Place a piece of cloth between the front disc brake piston and front disc brake cylinder.

   2. Apply compressed air to remove the front disc brake piston from the front disc brake cylinder.

      CAUTION:

      Do not place your fingers in front of the front disc brake piston when using compressed air.

      Note:

      Do not allow any brake fluid to spatter.

3. REMOVE CYLINDER BOOT

   1. for Type A:

      1. 

         *a	Protective Tape

         Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the front disc brake cylinder.

         Note:

         Be careful not to damage the front disc brake cylinder.

4. REMOVE PISTON SEAL

   1. 

      *a	Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the front disc brake cylinder.

      Note:

      Do not damage the inner surface or piston seal groove of the front disc brake cylinder.

5. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

6. REMOVE FRONT DISC BRAKE BLEEDER PLUG