STEERING PAD SWITCH INSTALLATION

PROCEDURE

  1. INSTALL STEERING PAD SWITCH ASSEMBLY

    1. Engage the 4 claws, 2 pins and 2 guides to install the steering pad switch assembly to the steering wheel sub-assembly.

    2. Install the 2 screws.

      2.35 N*m

      24 kgf*cm

      21 in.*lbf

    3. w/ Shift Paddle Switch:

      1. Connect the steering pad switch connector to No. 1 switch wire.

    4. w/ Back Switch of Steering Pad Switch Assembly:

      1. Engage the steering pad switch connector clamp to the lower steering wheel boss cover.

    5. Connect the steering pad switch connector to the spiral cable sub-assembly.

  2. INSTALL HORN BUTTON ASSEMBLY