VACUUM SWITCHING VALVE REMOVAL


  1. REMOVE NO. 2 ENGINE SERVICE HOLE COVER (for Standard Body)


    1. Detach the clips and fold back the carpet.

    2. B007TSQ

      Remove the 3 bolts and No. 2 engine service hole cover.

  2. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transmission)


    1. B007OTJE02

      Remove the 2 bolts and transmission oil filler tube sub-assembly.

    2. Remove the O-ring from the oil filler tube sub-assembly.

  3. REMOVE VACUUM SWITCHING VALVE ASSEMBLY


    1. B007P8X

      Disconnect the connector from the electric EGR control valve.

    2. Detach the clamp and wire harness.

    3. B007UFD

      Disconnect the connector and vacuum hose from the vacuum switching valve.

    4. Remove the bolt and vacuum switching valve.