STEREO JACK ADAPTER ASSEMBLY INSTALLATION

PROCEDURE

  1. INSTALL NO. 2 STEREO JACK ADAPTER ASSEMBLY

    Note:

    Perform this procedure only when replacement of No. 2 stereo jack adapter assembly is necessary.

    1. E294516

      Using vinyl tape or a wire harness clamp, secure a new No. 2 stereo jack adapter assembly to the wire harness as shown in the illustration.

  2. INSTALL RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

    Click here

  3. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

    Click here

  4. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (except Automatic Air Conditioning System)

    Click here

  5. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

    Click here

  6. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY

    1. Engage the 2 claws to install the No. 1 stereo jack adapter assembly.

  7. INSTALL CIGARETTE LIGHTER HOLE COVER

    Click here

  8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here