NOISE FILTER INSTALLATION

PROCEDURE


  1. INSTALL RADIO SETTING CONDENSER


    1. A005DK3

      Engage the claw to install a new terminal cover to the wire harness.

      Note


      • Make sure to hold the wire harness on the crimping side of the terminal when installing the wire harness from the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover has been deformed at installation, replace the terminal and terminal cover with new ones.

    2. A005EFH

      Engage the 6 claws to install the 2 new terminal covers with wire harness to a new condenser.

      Note


      • Do not use excessive force when inserting the terminal cover into the condenser.

      • If the terminal cover has been deformed at installation, replace the terminal, terminal cover and condenser with new ones.

    3. A005DJU

      Engage the claw to insert the cover as shown in the illustration.

    4. Engage the clamp to temporarily install a new radio setting condenser with wire harness.

    5. Install the new radio setting condenser with the bolt.

  2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  4. INSTALL NO. 2 ROOM LIGHT ASSEMBLY

    Click here

  5. CONNECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH (for Lower Side)

    Click here

  6. CONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH

    Click here

  7. INSTALL NO. 2 CUP HOLDER

    Click here

  8. INSTALL FRONT DECK SIDE TRIM COVER LH

    Click here

  9. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  10. INSTALL NO. 1 DECK TRIM COVER

    Click here

  11. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  12. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  13. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

  14. INSTALL SEAT TRACK BRACKET COVER LH

    Click here

  15. INSTALL REAR SEAT TRACK BRACKET COVER

    Click here

  16. INSTALL SEAT TRACK BRACKET COVER RH

    Click here

  17. INSTALL BACK DOOR SCUFF PLATE

    Click here

  18. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  19. INSTALL DECK FLOOR BOX RH

    Click here

  20. INSTALL REAR DECK FLOOR BOX

    Click here

  21. INSTALL NO. 1 DECK BOARD

    Click here

  22. INSTALL NO. 2 DECK BOARD

    Click here

  23. INSTALL DECK BOARD ASSEMBLY

    Click here