HEADLIGHT CLEANER SWITCH REMOVAL

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    • After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  2. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

    Click hereClick here

  3. REMOVE COWL SIDE TRIM BOARD LH

    Click hereClick here

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click hereClick here

  7. REMOVE HEADLIGHT CLEANER SWITCH ASSEMBLY

    1. E205828

      Detach the 2 claws and remove the switch.