2ZR-FE BATTERY / CHARGING TORQUE SPECIFICATIONS
Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
in.*lbf |
|||
|---|---|---|---|---|---|---|---|
Retainer plate x Generator drive end frame |
2.3 N*m |
23 kgf*cm |
20 in.*lbf |
||||
Generator coil assembly x Generator drive end frame |
5.6 N*m |
57 kgf*cm |
50 in.*lbf |
||||
Generator brush holder assembly x Generator coil assembly |
1.8 N*m |
18 kgf*cm |
16 in.*lbf |
||||
Generator rear end cover x Generator coil assembly |
4.6 N*m |
47 kgf*cm |
41 in.*lbf |
||||
Generator with clutch pulley x Generator rotor assembly |
with SST |
64 N*m |
653 kgf*cm |
47 ft.*lbf |
|||
without SST |
80 N*m |
816 kgf*cm |
59 ft.*lbf |
||||
Generator drive end frame x Wire harness clamp bracket |
8.0 N*m |
82 kgf*cm |
71 in.*lbf |
||||
Terminal B x Wire harness |
9.8 N*m |
100 kgf*cm |
87 in.*lbf |
||||
Adjusting bar x Timing chain cover sub-assembly |
25 N*m |
255 kgf*cm |
18 ft.*lbf |
||||
Negative (-) battery terminal x Battery |
5.4 N*m |
55 kgf*cm |
48 in.*lbf |
||||
Generator control ECU assembly x Negative (-) battery terminal |
7.6 N*m |
77 kgf*cm |
67 in.*lbf |
||||
Engine wire x Generator control ECU assembly |
7.6 N*m |
77 kgf*cm |
67 in.*lbf |
||||