STEERING PAD SWITCH INSPECTION

PROCEDURE


  1. INSPECT STEERING PAD SWITCH LH


    1. Measure the resistance according to the value(s) in the table below.

      A005BJBE02
      Standard Resistance
      Tester Connection Condition Specified Condition
      4 (AU1) - 1 (EAU) No switch pushed 95 to 105 kΩ
      Seek+ switch pushed Below 2.5 Ω
      Seek- switch pushed 323 to 335 Ω
      Volume+ switch pushed 980 to 1020 Ω
      Volume- switch pushed 3048 to 3172 Ω
      3 (AU2) - 1 (EAU) No switch pushed 95 to 105 kΩ
      MODE switch pushed Below 2.5 Ω
      On hook switch pushed 323 to 335 Ω
      Off hook switch pushed 980 to 1020 Ω
      Voice switch pushed 3048 to 3172 Ω

      Tech Tips

      If the result is not as specified, replace the steering pad switch LH.

      Text in Illustration
      *a

      Component without harness connected

      (Steering Pad Switch LH)

      		 *b Volume+
      *c Volume- *d MODE
      *e Seek+ *f Seek-
      *g Voice *h On hook
      *i Off hook - -

    2. Check the illumination.

      A005B7IE02

      1. Connect an auxiliary battery positive (+) lead to terminal 2 (IL+2) and a negative (-) lead to terminal 1 (EAU) of the steering pad switch LH connector.

      2. Check that the switch illumination comes on.

        OK
        Steering pad switch illumination comes on.

        Tech Tips

        If the result is not as specified, replace the steering pad switch LH.

        Text in Illustration
        *a

        Component without harness connected

        (Steering Pad Switch LH)

        		 - -

  2. INSPECT STEERING PAD SWITCH RH (w/o Multi-information Display)


    1. Measure the resistance according to the value(s) in the table below.

      A005CLOE03
      Standard Resistance
      Tester Connection Condition Specified Condition
      z9-1 (HO) - Terminal-A Always Below 1 Ω
      z9-2 (TRIP) - z9-8 (EAU) No switch pushed 1 MΩ or higher
      TRIP switch pushed Below 2.5 Ω
      z9-3 (AC1) - z9-8 (EAU) No switch pushed 95 to 105 kΩ
      R/F switch pushed 323 to 335 Ω
      TEMP+ switch pushed 980 to 1020 Ω
      TEMP- switch pushed 3048 to 3172 Ω
      z9-7 (DISP) - z9-8 (EAU) No switch pushed 1 MΩ or higher
      DISP switch pushed Below 2.5 Ω
      SR2-2 (IL+2) - z9-5 (IL+2) Always Below 1 Ω
      SR2-4 (AU1) - z9-10 (AU1) Always Below 1 Ω
      SR2-3 (AU2) - z9-9 (AU2) Always Below 1 Ω
      SR2-1 (EAU) - z9-8 (EAU) Always Below 1 Ω

      Tech Tips

      If the result is not as specified, replace the steering pad switch RH.

      Text in Illustration
      *a

      Component without harness connected

      (Steering Pad Switch RH)

      		 *b TEMP+
      *c TEMP- *d DISP
      *e R/F *f TRIP
      *g Terminal-A - -

    2. Check the illumination.

      A005APBE04

      1. Connect an auxiliary battery positive (+) lead to terminal 5 (IL+2) and a negative (-) lead to terminal 8 (EAU) of the steering pad switch RH connector.

      2. Check that the switch illumination comes on.

        OK
        Steering pad switch illumination comes on.

        Tech Tips

        If the result is not as specified, replace the steering pad switch RH.

        Text in Illustration
        *a

        Component without harness connected

        (Steering Pad Switch RH)

        		 - -

  3. INSPECT STEERING PAD SWITCH RH (w/ Multi-information Display)


    1. Measure the resistance according to the value(s) in the table below.

      A0059NNE03
      Standard Resistance
      Tester Connection Condition Specified Condition
      z9-1 (HO) - Terminal-A Always Below 1 Ω
      z9-2 (TRIP) - z9-8 (EAU) No switch pushed 1 MΩ or higher
      TRIP switch pushed Below 2.5 Ω
      z9-3 (+DP2) - z9-8 (EAU) No switch pushed 95 to 105 kΩ
      Left switch pushed Below 2.5 Ω
      Up switch pushed 323 to 335 Ω
      Down switch pushed 980 to 1020 Ω
      Right switch pushed 3048 to 3172 Ω
      z9-4 (DIST) - z9-6 (ECC)* No switch pushed 1 MΩ or higher
      Distance control switch pushed Below 2.5 Ω
      z9-7 (+DP) - z9-8 (EAU) No switch pushed 1 MΩ or higher
      Enter switch pushed Below 2.5 Ω
      Back switch pushed 980 to 1020 Ω
      SR2-2 (IL+2) - z9-5 (IL+2) Always Below 1 Ω
      SR2-4 (AU1) - z9-10 (AU1) Always Below 1 Ω
      SR2-3 (AU2) - z9-9 (AU2) Always Below 1 Ω
      SR2-1 (EAU) - z9-8 (EAU) Always Below 1 Ω

      • *: w/ Distance Control Switch

      Tech Tips

      If the result is not as specified, replace the steering pad switch RH.

      Text in Illustration
      *A w/ Distance Control Switch - -
      *a

      Component without harness connected

      (Steering Pad Switch RH)

      		 *b Up
      *c Down *d Left
      *e Right *f Enter
      *g Back *h TRIP
      *i Distance control *j Terminal-A

    2. Check the illumination.

      A005EUNE03

      1. Connect an auxiliary battery positive (+) lead to terminal 5 (IL+2) and a negative (-) lead to terminal 8 (EAU) of the steering pad switch RH connector.

      2. Check that the switch illumination comes on.

        OK
        Steering pad switch illumination comes on.

        Tech Tips

        If the result is not as specified, replace the steering pad switch RH.

        Text in Illustration
        *a

        Component without harness connected

        (Steering Pad Switch RH)

        		 - -