HEADLIGHT CLEANER MOTOR INSPECTION


  1. INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. Remove the washer jar.

    2. Disconnect the headlight cleaner motor and pump assembly connector.

      Tech Tips

      Make sure that the headlight cleaner motor and pump assembly is installed to the washer jar.

    3. Fill the washer jar with washer fluid.

    4. After filling washer jar with washer fluid, wake sure that washer fluid does not leak from the seal.

    5. A01E1ZUE02
      Text in Illustration
      *a

      Component without harness connected

      (Headlight Cleaner Motor and Pump Assembly)

      Connect the positive (+) lead of the battery to terminal 2 of the headlight cleaner motor and pump assembly, and the negative (-) lead to terminal 1.

    6. Check that washer fluid flows from the washer jar.

      OK
      Washer fluid flows from the washer jar.

      If the result is not as specified, replace the headlight cleaner motor and pump assembly.