AIR FUEL RATIO SENSOR(for Sensor 2) REMOVAL

PROCEDURE

  1. REMOVE FRONT NO. 3 ENGINE UNDER COVER (for Full Cover Type)

    1. Remove the 4 clips and front No. 3 engine under cover.

  2. REMOVE AIR FUEL RATIO SENSOR

    1. A426236C01

      *1

      Wire Harness Clamp Bracket

      Disconnect the air fuel ratio sensor connector.

    2. Disengage the 2 wire harness clamps.

    3. Remove the wire harness clamp bracket from the air fuel ratio sensor.

    4. A355364N01

      Using SST, remove the air fuel ratio sensor from the front exhaust pipe assembly.

      09224-00012

      Note:

      If the air fuel ratio sensor has been struck or dropped, replace it.