CHECK AUTO OPERATION FUNCTION
Note
Make sure that initialization has been completed before performing this inspection.
The sliding roof glass auto operation function can be customized. Make sure that the auto operation function is ON.
Tech Tips
The sliding roof switch is positioned in the map light sub-assembly.
When the sliding roof switch is slid forward or backward for 0.3 seconds or less, the sliding roof glass will move but the auto operation function will not operate.
When a sliding roof switch is pressed for 0.3 seconds or less, the sliding roof glass will move but the auto operation function will not operate.
Turn the engine switch on (IG).
When the sliding roof glass is fully closed, slide the sliding roof switch backward for 0.3 seconds or more. Check that the sliding roof glass automatically slides until it is fully opened.
Tech Tips
The roof sunshade trim is linked with the sliding roof glass auto slide open function and will move to the fully open position.
When the sliding roof glass is fully open, slide the sliding roof switch forward for 0.3 seconds or more. Check that the sliding roof glass automatically slides until it is fully closed.
When the sliding roof glass is fully closed, press the sliding roof switch for 0.3 seconds or more. Check that the sliding roof glass automatically tilts up until it is fully tilted upward.
Tech Tips
If the roof sunshade trim is less than half open, it will move to the halfway open position in conjunction with the sliding roof glass operation.
When the auto operation function is operating, check that sliding the sliding roof switch backward or forward or pressing any of the switches on the sliding roof switch stops the sliding roof glass operation.
CHECK KEY-OFF OPERATION FUNCTION
Turn the engine switch from on (IG) to off, and check that the sliding roof glass and roof sunshade trim can be operated. Then open the driver or front passenger door once, and check that the sliding roof glass cannot be operated.
Turn the engine switch from on (IG) to off and wait for approximately 45 seconds. Check that the sliding roof glass cannot be operated.
Operate the auto function with the driver or front passenger door open. While the sliding roof glass is moving, turn the engine switch off. Check that the sliding roof glass stop immediately.
CHECK JAM PROTECTION FUNCTION
CAUTION:
Do not use a part of your body, for example, your hand, to check the jam protection function.
Do not allow anything to become caught in the sliding roof glass by accident while performing this inspection.
Perform the inspection from the inside of the vehicle.
Note
Do not use hard objects, such as a hammer, to avoid damaging the sliding roof glass and roof sunshade.
Make sure that initialization has been completed before performing this inspection.
The jam protection function does not operate when the sliding roof glass is close to the fully closed position.
When the slide close function is operating and an object is caught between the vehicle body and sliding roof glass, check that the sliding roof glass opens a distance of 200 mm (7.87 in.) from the point of contact with the object, or opens fully if an opening distance of 200 mm (7.87 in.) is not available.
When the tilt down function is operating and an object is caught between the vehicle body and the sliding roof glass, check that the sliding roof glass tilts up fully.
CHECK KEY-LINKED FUNCTION
CAUTION:
Make sure that no one is near the vehicle while performing this inspection. Also be careful not to let any part of your body such as your hand get caught in the sliding roof glass by accident while performing this inspection.
Note
Make sure that initialization has been completed before performing this inspection.
The sliding roof glass key-linked function can be customized. Make sure that the key-linked function is ON.
Tech Tips
This function is linked with the power window key-linked function.
Check the key-linked open function:
Insert the mechanical key into the driver door key cylinder and turn the mechanical key to the unlock position for approximately 2.5 seconds or more. Check that slide open/tilt up operation occurs. Then release the mechanical key and check that the sliding roof glass stops moving.
Check the key-linked close function:
Insert the mechanical key into the driver door key cylinder, and turn the mechanical key to the lock position for approximately 2.5 seconds or more. Check that the slide close/tilt down operation occurs. Then release the mechanical key and check that the sliding roof glass stops moving.
CHECK WIRELESS TRANSMITTER-LINKED FUNCTION
CAUTION:
Make sure that no one is near the vehicle while performing this inspection. Also be careful not to let any part of your body such as your hand get caught in the sliding roof glass by accident while performing this inspection.
Note
Make sure that initialization has been completed before performing this inspection.
The sliding roof glass wireless transmitter-linked function can be customized. Make sure that the wireless transmitter-linked function is ON.
Tech Tips
This function is linked with the power window wireless transmitter-linked function.
Check the wireless transmitter-linked open function:
Close and lock all the doors.
Hold down the transmitter UNLOCK switch for approximately 4 seconds or more and check that the slide open/tilt up operation occurs. Also, when the UNLOCK switch is released, check that the sliding roof glass stops moving.
CHECK SLIDING ROOF GLASS OPEN WARNING FUNCTION
Note
Make sure that initialization has been completed before performing this inspection.
The sliding roof glass open warning can be customized. Make sure that the sliding roof glass open warning is ON.
Open the sliding roof glass by using the map light sub-assembly.
When the engine switch is turned from on (IG) to off and the driver door is opened with the key in the vehicle, check that the multi-information display in the combination meter assembly displays "Slide Roof Open Warning".