AUTOMATIC HIGH BEAM SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE AUTOMATIC HIGH BEAM SYSTEM

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tip:

    The following items can be customized.

    1. Customizing with the GTS.

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / Light Control.

      5. Select the setting by referring to the table below.

        Light Control

        Tester Display

        Description

        Default

        Setting

        ECU

        Automatic High Beam

        Automatic high beam system

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)
        Tip:

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.