REAR VIEW MONITOR SYSTEM(except Sedan)
| DTC Code | DTC Name |
|---|---|
| HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
Use the following procedure to troubleshoot the rear view monitor system.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
Result
Proceed to
NEXT
INSPECT BATTERY VOLTAGE
Measure the battery voltage.
Standard Voltage
11 to 14 V
Tip:If the voltage is below 11 V, replace or recharge the battery before proceeding to the next step.
Result
Proceed to
NEXT
PROBLEM SYMPTOM CONFIRMATION
Result
Result
Proceed to
Symptom does not occur
A
Symptom occurs
B
B CHECK IF SAME SYMPTOM APPEARS IN OTHER SYSTEMClick here
SYMPTOM SIMULATION
Result
Proceed to
NEXT
CHECK IF SAME SYMPTOM APPEARS IN OTHER SYSTEM
Refer to the audio and visual system (for Radio and Display Type).*1
Refer to the navigation system.*2
*1: w/o Navigation System
*2: w/ Navigation System
Result
Result
Proceed to
Symptom does not appear
A
Symptom appears (w/o Navigation System)
B
Symptom appears (w/ Navigation System)
C
PROBLEM SYMPTOMS TABLE
Refer to Problem Symptoms Table.
Result
Result
Proceed to
Fault is not listed in Problem Symptoms Table
A
Fault is listed in Problem Symptoms Table
B
B ADJUST, REPAIR OR REPLACEClick here
PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM
Terminals of ECU.
Result
Proceed to
NEXT
ADJUST, REPAIR OR REPLACE
Result
Proceed to
NEXT
CONFIRMATION TEST
Result
Proceed to
NEXT
NEXT END