CRANKSHAFT POSITION SENSOR REMOVAL


  1. REMOVE ENGINE UNDER COVER NO.1 (w/ Engine Under Cover No.1)

  2. SEPARATE VANE PUMP OIL RESERVOIR ASSEMBLY


    1. B007TSM

      Remove the 2 bolts. Separate the vane pump oil reservoir assembly.

  3. REMOVE CRANKSHAFT POSITION SENSOR


    1. B007VEA

      Disconnect the crankshaft position sensor connector.

    2. Separate the connector from the vacuum pipe No.1.

    3. B007THJ

      Separate the 3 wire harness clamps.

    4. Remove the bolt and the crankshaft position sensor.