COMBINATION METER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL COMBINATION METER ASSEMBLY


    1. Connect the connector.

    2. Engage the 2 clips to install the combination meter assembly.

    3. Install the 2 screws.

  2. INSTALL UPPER INSTRUMENT PANEL METER ORNAMENT

    Click here

  3. INSTALL METER HOOD SUB-ASSEMBLY

    Click here

  4. INSTALL INSTRUMENT PANEL ORNAMENT (w/ Large Ornament Panel)

    Click here

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Large Ornament Panel)

    Click here

  6. REGISTER ECU CODE (w/o Entry and Start System)


    1. Register the ECU code (Refer to the Service Bulletin).