ENGINE COOLANT TEMPERATURE SENSOR (w/ EGR Cooler) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. DRAIN ENGINE COOLANT

    Note

    Do not remove the radiator reservoir cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. A01DY58E01

      Drain the coolant by removing the reservoir cap and, using a wrench, remove the vent plug.

    2. Loosen the cylinder block drain cock plug and the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

      A01DY14E01

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A01DWMB

      Disconnect the sensor connector.

    2. Remove the sensor.

    3. Remove the gasket from the sensor.