SIDE TURN SIGNAL LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. Connect the connector.

    2. B0057D1C01
      B008J1W Alignment Point

      Align the side turn signal light assembly LH with the alignment point on the outer mirror assembly LH and set it in place.

    3. Attach the 2 claws to install the side turn signal light assembly LH.

  2. INSTALL LOWER OUTER MIRROR COVER LH


    1. Attach the 2 guides and 3 claws to install the lower outer mirror cover LH.

    2. Install the screw.

    3. w/ Panoramic View Monitor System:

      Attach the wire harness clamp and connect the connector.

  3. INSTALL OUTER MIRROR BEZEL LH


    1. Attach the guide and 5 claws to install the outer mirror bezel LH.

  4. INSTALL OUTER MIRROR COVER LH


    1. Attach the 2 guides and 6 claws to install the outer mirror cover LH.

  5. INSTALL OUTER MIRROR LH

    Click here

  6. INSPECT SIDE TURN SIGNAL LIGHT


    1. Turn the engine switch on (IG).

    2. Turn the side turn signal switch left to right and check that the side turn signal light illuminates.

  7. PERFORM SYSTEM CALIBRATION (w/ Panoramic View Monitor System)

    Click here