REAR SEAT ASSEMBLY(for Wagon) REASSEMBLY

PROCEDURE

  1. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

    Click here

  2. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH (for RH Side)

    1. B327119

      Engage the 2 guides.

    2. Install the rear seat lock control lever sub-assembly RH with the screw.

      2.0 N*m

      20 kgf*cm

      18 in.*lbf

    3. B352370

      Connect the rear No. 1 seat lock cable assembly as shown in the illustration.

    4. B352368

      Connect the rear No. 1 seat lock cable assembly as shown in the illustration.

    5. B350417

      Engage the 3 clamps to install the rear No. 1 seat lock cable assembly.

  3. INSTALL REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)

    Click here

  4. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)

    Click here

  5. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH (for RH Side)

    Click here

  6. INSTALL SEATBACK COVER WITH PAD (for RH Side)

    Click here

  7. INSTALL REAR SEATBACK LOCK BEZEL RH (for RH Side)

    Click here

  8. INSTALL SEAT BELT ANCHOR COVER CAP (for RH Side)

    Click here

  9. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)

    w/ Center Armrest:

    Click here

  10. INSTALL CENTER ARMREST HINGE COVER (for RH Side)

    w/ Center Armrest:

    Click here

  11. INSTALL REAR SEATBACK COVER (for RH Side)

    Click here

  12. INSTALL BACK PANEL TRIM COVER (for RH Side)

    1. B353026

      Using a 6 mm hexagon socket wrench, install the room partition net anchor and back panel trim cover with the 2 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Tip:

      Use the same procedure for the other side.

  13. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for RH Side)

    Click here

  14. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH (for LH Side)

    1. B352366

      Engage the 2 guides.

    2. Install the rear seat lock control lever sub-assembly LH with the screw.

      2.0 N*m

      20 kgf*cm

      18 in.*lbf

    3. B350422

      Connect the rear No. 1 seat lock cable assembly as shown in the illustration.

    4. B350420

      Connect the rear No. 1 seat lock cable assembly as shown in the illustration.

    5. B350418

      Engage the 2 clamps and install the rear No. 1 seat lock cable assembly.

  15. INSTALL REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)

    Tip:

    Use the same procedure as for the RH side.

  16. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH (for LH Side)

    Click here

  17. INSTALL SEATBACK COVER WITH PAD (for LH Side)

    Click here

  18. INSTALL REAR SEATBACK LOCK BEZEL LH (for LH Side)

    Tip:

    Use the same procedure as for the RH side.

  19. INSTALL REAR SEATBACK COVER (for LH Side)

    Tip:

    Use the same procedure as for the RH side.