BACK DOOR DISASSEMBLY


  1. REMOVE OUTER UNDER REAR VIEW MIRROR ASSEMBLY (w/ Outer Under Rear View Mirror)


    1. B007PUNE01

      Remove the 3 screws, disengage the pin and remove the outer under rear view mirror.

      Tech Tips

      The screw <a> cannot be removed because it is integrated with the outer under view mirror.

  2. REMOVE BACK DOOR SERVICE HOLE COVER (for Wide Body)

  3. REMOVE UPPER BACK DOOR TRIM BOARD ASSEMBLY (w/o Rear Wiper)


    1. B007SARE01

      Detach the 5 clips and remove the upper back door trim board assembly.

  4. REMOVE UPPER BACK DOOR TRIM BOARD ASSEMBLY (w/ Rear Wiper)


    1. B007TLRE01

      Detach the 6 clips and remove the upper back door trim board assembly.

    2. Remove the remaining clips on the body, and reinstall them to the upper back door trim board assembly.

  5. REMOVE UPPER BACK DOOR TRIM BOARD ASSEMBLY (for Wide Body)

    B007TJ1E01

    1. Detach the 18 clips and remove the upper back door trim board assembly.

    2. Remove the remaining clips on the body, and reinstall them to the upper back door trim board assembly.

  6. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)


    1. B007R8TE01

      Disengage the 3 claws and separate the head cap as shown in the illustration.

    2. Remove the rear wiper arm nut and rear wiper arm and blade assembly.

  7. REMOVE REAR WIPER SHAFT COVER (w/ Rear Wiper)


    1. B007TUN

      Remove the rear wiper shaft cover.

  8. REMOVE NO. 1 REAR WIPER LINK PIVOT WASHER (w/ Rear Wiper)


    1. B007U5O

      Using the socket wrench (27 mm), remove the lock nut and rear No.1 wiper link pivot washer.

      Note

      Do not damage the glass.

  9. REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)


    1. B007OF3E01

      Disconnect the connector and remove the clamp.

    2. Remove the 3 bolts and rear wiper motor and grommet as a unit.

    3. B007OY7E01

      Remove the grommet from the rear wiper motor.

  10. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY (w/ High Mounted Stop Light)


    1. B007W9CE01

      Disconnect the connector.

    2. Using a screwdriver, detach the 8 claws and remove the high mounted stop light assembly.

      Text in Illustration
      *1 Protective Tape

      Tech Tips

      Tape the screwdriver tip before use.

    3. B007SDS

      Remove the gasket from the high mounted stop light assembly.

      Note

      When removing the high mounted stop light assembly, replace the gasket with a new one.

  11. REMOVE NO. 3 BACK DOOR WIRE


    1. Disconnect the connectors.

    2. B007OGO

      Detach the 3 clamps and remove the No. 3 back door wire.

  12. REMOVE NO. 1 REAR WINDOW WIRE


    1. B007Q9H

      Detach the 2 clamps and remove the No. 1 rear window wire.

  13. REMOVE BACK DOOR INSIDE HANDLE COVER (w/ Cover)

    B007V2C

    1. Detach the 4 claws and remove the back door inside handle cover.

  14. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Back Door Inside Handle)


    1. B007PO3

      Remove the screw and the back door inside handle assembly.

  15. REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Inside Handle Bezel)

    B007UD8E02
    Text in Illustration
    *A w/o Illumination
    *B w/ Illumination

    1. w/o Illumination:


      1. Remove the 2 screws and the back door inside handle bezel.

    2. w/ Illumination:


      1. Remove the 2 screws and the back door inside handle bezel.

      2. Disconnect the connector.

  16. REMOVE BACK DOOR PULL STRAP (w/ Strap)


    1. B007V54

      Remove the screw and back door pull strap.

  17. REMOVE BACK DOOR TRIM BOARD (for Board)


    1. B007QYP

      Using a clip remover, remove the 16 clips and the back door trim board.

  18. REMOVE BACK DOOR TRIM BOARD (for Molded Door Trim)


    1. B007PPB

      Remove the 2 screws.

    2. Using a clip remover, remove the 18 clips and the back door trim board.

  19. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Back Door Inside Handle)


    1. Disconnect the link.

    2. Remove the 3 screws and the back door inside handle assembly.

      B007OYLE02
      Text in Illustration
      *A w/o Power Door Lock *B w/ Power Door Lock

  20. REMOVE BACK DOOR REMOTE CONTROL ASSEMBLY (w/o Power Door Lock)


    1. Disconnect the wire and link.

    2. Detach the clamp.

    3. Remove the 2 screws and the back door remote control assembly.

      B007OFJ

  21. REMOVE BACK DOOR REMOTE CONTROL ASSEMBLY (w/ Power Door Lock)


    1. Disconnect the wire and link.

    2. Detach the 2 clamps.

    3. Remove the 3 screws and the back door remote control assembly.

      B007OWX

  22. REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY


    1. B007RHD

      Remove the 2 nuts and back door lock cylinder assembly.

  23. REMOVE BACK DOOR OUTSIDE HANDLE


    1. B007Q6J

      Remove the 2 nuts and the back door outside handle.

  24. REMOVE BACK DOOR OUTSIDE GARNISH


    1. w/ Smart Entry and Start System:


      1. Disconnect the 2 connectors.

    2. w/o Smart Entry and Start System:


      1. Disconnect the connector.

    3. B007TXY

      Remove the 5 nuts.

    4. Detach the 2 clips and remove the back door outside garnish.

    5. B007RY9

      Remove the grommet.

  25. REMOVE LICENSE PLATE LIGHT ASSEMBLY (w/ Smart Entry and Start System)


    1. B007TMC

      Remove the 2 screws.

    2. B007OC1E01

      Remove the 2 screws and detach the 2 wire harness clamps.

    3. Remove the 2 license plate light assemblies (smart switch) from the back door outside garnish in the order shown in the illustration.

  26. REMOVE DOOR ELECTRICAL KEY SWITCH COVER (w/ Smart Entry and Start System)


    1. Remove the door electrical key switch cover.

  27. REMOVE LICENSE PLATE LIGHT ASSEMBLY (w/o Smart Entry and Start System)


    1. B007OC1E01

      Remove the 2 screws and detach the 2 wire harness clamps.

    2. Remove the 2 license plate lights from the back door outside garnish in the order shown in the illustration.

  28. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


    1. B007USZ

      Disconnect the connector.

    2. B007S4J

      Remove the screw.

    3. Detach the 2 claws and television camera assembly.

  29. REMOVE BACK DOOR CLOSER RELAY (w/ Easy Closer)


    1. B007OBZ

      Disconnect the connector.

    2. Remove the 2 bolts and back door closer relay.

  30. REMOVE BACK DOOR CLOSER COVER (w/ Easy Closer)


    1. B007TZR

      Detach the 3 clips and 3 claws and remove the back closer cover.

  31. REMOVE BACK DOOR STOPPER BRACKET SUB-ASSEMBLY (for Rough Road Area Spec)


    1. B007OVU

      Remove the 2 bolts and the back door stopper bracket sub-assembly.

  32. REMOVE BACK DOOR LOCK PROTECTOR (w/ Rear Bumper Step)


    1. B007SJ7

      Remove the screw and the back door lock protector.

  33. REMOVE PIN HOLD CLIP (w/ Easy Closer)


    1. B007OBN

      Remove the pin hold clip.

  34. REMOVE BACK DOOR LOCK ASSEMBLY (w/ Easy Closer)


    1. B007SDA

      Remove the 4 bolts and the back door lock assembly.

  35. REMOVE BACK DOOR CLOSER MOTOR ASSEMBLY (w/ Easy Closer)


    1. B007ORC

      Disconnect the connector and detach the clamp.

    2. Remove the 3 bolts and back door closer motor assembly.

  36. REMOVE DOOR CONTROL MOTOR (w/ Easy Closer)


    1. B007V6N

      Using a T25 "TORX" driver, remove the 3 "TORX" screws and door control motor.

  37. REMOVE BACK DOOR LOCK ASSEMBLY (w/o Easy Closer)


    1. B007V7ME03
      Text in Illustration
      *A w/o Rear Bumper Step
      *B w/ Rear Bumper Step

      Remove the 3 bolts and the back door lock assembly.

  38. REMOVE NO. 2 BACK DOOR WIRE


    1. B007S4K

      Remove the bolt.

    2. Detach the 6 clamps and remove the No. 2 back door wire.

  39. REMOVE BACK DOOR STOPPER LH


    1. B007RR6E04
      Text in Illustration
      *A for Standard Area Spec
      *B for Rough Road Area Spec

      Remove the 2 bolts and the back door stopper LH.

  40. REMOVE BACK DOOR STOPPER RH

    Tech Tips

    Use the same procedure for the LH side.

  41. REMOVE BACK DOOR STAY ASSEMBLY LH


    1. B007PXO

      Remove the 4 bolts and the back door stay assembly LH.

      Note

      Remove the back door stay while holding the back door to prevent it from moving down.

  42. REMOVE BACK DOOR STAY ASSEMBLY RH

    Tech Tips

    Use the same procedure for the LH side.