IGNITION SWITCH INSPECTION

PROCEDURE

  1. INSPECT IGNITION SWITCH ASSEMBLY

    1. A296191C01

      *a

      Component without harness connected

      (Ignition Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      -

      LOCK

      10 kΩ or higher

      5 (AM1) - 7 (ACC)

      ACC

      Below 1 Ω

      5 (AM1) - 7 (ACC)

      5 (AM1) - 8 (IG1)

      4 (AM2) - 3 (IG2)

      ON

      Below 1 Ω

      6 (ST1) - 5 (AM1)

      6 (ST1) - 8 (IG1)

      2 (ST2) - 4 (AM2)

      2 (ST2) - 3 (IG2)

      START

      Below 1 Ω

      If the result is not as specified, replace the ignition switch assembly.