ENGINE SWITCH REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick here

  3. REMOVE NO. 1 METER HOOD CLUSTER

    Click here

  4. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  7. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  8. REMOVE ENGINE SWITCH

    1. A294692

      Disengage the 2 claws and remove the engine switch.