PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE

1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY

   1. Move the shift lever to N.

   2. 

      *a	Neutral Basic Line
      *b	Protrusion

      Loosen the 2 bolts of the park/neutral position switch assembly.

   3. Align the protrusion with the neutral basic line.

   4. Hold the switch in that position and tighten the 2 bolts.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

   5. After the adjustment, check the operation of the switch.

      Click here