METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE METER / GAUGE SYSTEM

    1. Customizing with the GTS

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning, Display or Unit conversion.

      5. Select the setting by referring to the table below.

        Note:

        Be sure to record the current value before customizing.

        Warning

        Tester Display

        Description

        Default

        Setting

        ECU

        Key Remind Sound

        Function to change the frequency of the key reminder warning buzzer

        Normal

        00:Normal,01:Slow,10:Fast

        Combination meter assembly

        Lane Change Flashing Times Setting

        Function to change the lane change flashing times

        3

        00:OFF,01:3,10:5,11:7

        Combination meter assembly

        Display

        Tester Display

        Description

        Default

        Setting

        ECU

        ECO Drive Indicator Zone

        Function to change the ECO drive indicator zone*1, *2

        ON

        0:OFF,1:ON

        Combination meter assembly

        ODO Display Time After IG OFF Setting

        Function to change the ODO display time after ignition switch is turned off

        30s

        00:30s,01:60s,10:600s,11:OFF

        Combination meter assembly

        Unit conversion

        Tester Display

        Description

        Default

        Setting

        ECU

        Units By Region

        Function to change the units on the display*2

        km/l

        000:Km/l JP,100:Km/l,010:Ml/g US,110:Ml/g UK,001:km/g

        Combination meter assembly

        • *1: for CVT

          *2: for Multi-information Display (Segment LCD Type)