FRONT BRAKE REASSEMBLY

TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

Tip:

Fully tighten the front disc brake bleeder plug after bleeding the system.

INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

INSTALL PISTON SEAL

	Lithium Soap Base Glycol Grease

Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal.

Install the piston seal to the front disc brake cylinder.

Note:
Securely install the piston seal into the groove of the front disc brake cylinder.

INSTALL FRONT DISC BRAKE PISTON

*1	Cylinder Boot
*2	Front Disc Brake Piston
	Lithium Soap Base Glycol Grease

Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot.

Install the cylinder boot to the front disc brake piston.

Note:
Securely install the cylinder boot into the groove of the front disc brake piston.
Apply a light layer of lithium soap base glycol grease to the contact surfaces of the front disc brake piston, and install it to the front disc brake cylinder.

Note:
Do not forcibly install the front disc brake piston into the front disc brake cylinder.

INSTALL CYLINDER BOOT

for Type A:

*1	Cylinder Boot

Using SST and a hammer, install the cylinder boot to the front disc brake cylinder.

09550-60010

Note:

Securely install the cylinder boot into the groove of the front disc brake cylinder.
Do not damage the cylinder boot.

for Type B:

*1	Set Ring
*2	Cylinder Boot

Install the cylinder boot to the disc brake cylinder assembly.

Note:

Securely install the cylinder boot into the groove of the front disc brake cylinder and front disc brake piston.

*a	Protective Tape

Using a screwdriver with its tip wrapped with protective tape, install a new set ring.

Note: