RADIO RECEIVER INSTALLATION

PROCEDURE

1. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

2. INSTALL NO. 1 RADIO RECEIVER BRACKET

   
   

   1. Install the No. 1 radio receiver bracket with the 4 screws.

3. INSTALL NO. 2 RADIO RECEIVER BRACKET

   Tech Tips

   Use the same procedure as for the No. 1 radio receiver bracket.

4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

   
   

   1. Connect each connector.

   2. Engage the 2 guides and 5 claws.

   3. Install the radio and display receiver assembly with bracket with the 4 bolts.

5. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

6. INSTALL INSTRUMENT PANEL BOX ASSEMBLY

   Click here

7. INSTALL INTEGRATION CONTROL AND PANEL

   Click here

8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here

9. INSTALL DECK FLOOR BOX RH

   Click here

10. INSTALL REAR DECK FLOOR BOX

    Click here

11. INSTALL NO. 1 DECK BOARD

    Click here

12. INSTALL NO. 2 DECK BOARD

    Click here

13. INSTALL DECK BOARD ASSEMBLY

    Click here