FRONT BUMPER INSTALLATION

PROCEDURE

  1. INSTALL FRONT BUMPER ASSEMBLY

    1. B372554

      Move the front bumper assembly into position as shown in the illustration.

    2. Temporarily install the front bumper assembly with the 7 clips.

    3. w/ Fog Light, Daytime Running Light:

      1. B371046C01

        *A

        w/ Fog Light

        *B

        w/ Daytime Running Light

        Pull back the side of the front bumper assembly, connect each connector as shown in the illustration.

        Note:

        Do not apply excessive force when pulling back the front bumper assembly.

        Tip:

        Use the same procedure for the RH side and LH side.

    4. B371043

      Engage the 2 claws.

    5. B371041

      Engage the 4 claws as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. Install the 7 screws.

    7. Pull back the edge of the front fender liner and install the 2 clips.

      Note:

      Do not apply excessive force when pulling back the front fender liner.

    8. Install the front bumper assembly with the 4 clips.

  2. ADJUST FOG LIGHT ASSEMBLY (w/ Fog Light)

    Click here