INTAKE MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  2. REMOVE EGR PIPE ASSEMBLY

    Click here

  3. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

    Click here

  4. REMOVE PURGE VSV

    Click here

  5. REMOVE INTAKE MANIFOLD


    1. A005EV8

      Disconnect the 3 connectors and 2 wire harness clamps.

    2. Remove the engine oil level dipstick.

    3. A005A82

      Disconnect the wire harness clamp, and then remove the 2 bolts and engine oil level dipstick guide sub-assembly.

    4. Remove the O-ring from the engine oil level dipstick guide sub-assembly.

    5. A005DIO

      Disconnect the fuel vapor feed hose and ventilation hose.

    6. A005F11

      Remove the 2 bolts, 2 nuts and intake manifold.

    7. Remove the No. 1 intake manifold to head gasket.

  6. REPLACE STUD BOLT

    Tech Tips

    If a stud bolt is deformed or the threads are damaged, replace it.


    1. A005CZT

      Using an E6 "TORX" socket wrench, replace the 2 stud bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }