IGNITION SWITCH REMOVAL

PROCEDURE

1. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

3. REMOVE METER HOOD SUB-ASSEMBLY

   Click here

4. REMOVE UPPER INSTRUMENT PANEL METER ORNAMENT

   Click here

5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

   Click here

6. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY (w/ Knee Airbag)

   Click here

7. REMOVE LOWER STEERING COLUMN COVER

   Click here

8. REMOVE UPPER STEERING COLUMN COVER

   Click here

9. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY

   
   

   1. 

      Disconnect the connector.

   2. Remove the 2 screws, and remove the ignition switch.