STEERING WHEEL REMOVAL

PROCEDURE


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY


    1. A0059MLE01
      Text in Illustration
      *a Matchmark

      Remove the steering wheel assembly set nut.

    2. Put matchmarks on the steering wheel assembly and steering main shaft.

    3. Disconnect each connector from the spiral cable sub-assembly.

    4. A005AJEE03
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05070 )

      Note

      Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

  4. REMOVE STEERING SHAKE DAMPER


    1. A0059YS

      Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.

  5. REMOVE STEERING PAD SWITCH ASSEMBLY

    Click here

  6. REMOVE CRUISE CONTROL MAIN SWITCH

    Click here

  7. REMOVE CRUISE CONTROL SWITCH WIRE

  8. REMOVE LOWER STEERING WHEEL BOSS COVER


    1. A005EFR

      Disengage the 2 pins and 4 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.