ТЯГА ПЕДАЛИ АКСЕЛЕРАТОРА УСТАНОВКА


  1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY

    Note


    • Avoid physical shock to the accelerator pedal.

    • Do not disassemble the accelerator pedal assembly.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal rod assembly.

      If applied, the accelerator pedal rod assembly must be replaced.


    1. Install the accelerator pedal rod assembly with the 2 nuts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
    2. Connect the accelerator pedal rod connector.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.