ENGINE UNIT REPLACEMENT


  1. REMOVE TIMING GEAR COVER OIL SEAL

    Tech Tips

    There are 2 methods to remove the oil seal.


    1. If the timing gear cover is removed from the cylinder block:


      1. A01DWGME01

        Using a screwdriver and hammer, tap out the oil seal.

    2. A01DY09E01

      If the timing gear cover is installed to the cylinder block:


      1. Using a knife, cut through the oil seal lip.

      2. Using a screwdriver, pry out the oil seal.

        Note

        Be careful not to damage the crankshaft.

  2. REMOVE TIMING GEAR COVER OIL SEAL

    Tech Tips

    There are 2 methods to remove the oil seal.


    1. If the timing gear cover is removed from the cylinder block:


      1. A01DWJQE01

        Using a screwdriver and hammer, tap out the oil seal.

    2. If the timing gear cover is installed to the cylinder block:


      1. A01DZBGE01

        Using SST, remove the oil seal.

        SST
        09308-10010
        09950-40011   ( 09957-04010 )
        09950-60010   ( 09951-00350 )

  3. REMOVE REAR ENGINE OIL SEAL


    1. A01E01XE01

      Using a screwdriver and hammer, tap out the oil seal.

  4. INSTALL REAR ENGINE OIL SEAL


    1. A01DZ7VE01

      Using SST and a hammer, tap in a new oil seal until its surface is flush with the rear oil seal retainer edge.

      SST
      09518-36030
      09950-70010   ( 09951-07100 )

    2. Apply MP grease to the oil seal lip.

  5. INSTALL TIMING GEAR COVER OIL SEAL

    Tech Tips

    There are 2 methods to install the oil seal.


    1. If the timing gear cover is removed from the cylinder block:


      1. A01DVQ3E02

        Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear cover edge.

        SST
        09223-15020
        09502-12010
        09950-70010   ( 09951-07100 )

      2. Apply MP grease to the oil seal lip.

    2. A01DZOLE01

      If the timing gear cover is installed to the cylinder block:


      1. Apply MP grease to the oil seal lip.

      2. Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear cover edge.

        SST
        09223-15020
        09502-12010
        09950-70010   ( 09951-07100 )

  6. INSTALL TIMING GEAR COVER OIL SEAL

    Tech Tips

    There are 2 methods to install the oil seal.


    1. If the timing gear cover is removed from the cylinder block:


      1. A01E15ZE01

        Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear cover edge.

        SST
        09214-76011

      2. Apply MP grease to the oil seal lip.

    2. If the timing gear cover is installed to the cylinder block:


      1. Apply MP grease to a new oil seal lip.

      2. A01E0OBE01

        Using SST and a hammer, tap in the oil seal until its surface is flush with the timing gear cover edge.

        SST
        09214-76011