PROCEDURE
PRECAUTION
Note
When removing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.
INSTALL NAVIGATION ECU SUB-ASSEMBLY
INSTALL HARD DISK DRIVE
INSTALL NO. 1 RADIO RECEIVER BRACKET
Install the No. 1 radio receiver bracket with the 4 screws.
INSTALL NO. 2 RADIO RECEIVER BRACKET
Tech Tips
Use the same procedure as for the No. 1 radio receiver bracket.
INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
Connect each connector.
Engage the 2 guides and 5 claws.
Install the navigation receiver assembly with bracket with the 4 bolts.
INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
INSTALL INSTRUMENT PANEL BOX ASSEMBLY
INSTALL INTEGRATION CONTROL AND PANEL
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL DECK FLOOR BOX RH
INSTALL REAR DECK FLOOR BOX
INSTALL NO. 1 DECK BOARD
INSTALL NO. 2 DECK BOARD
INSTALL DECK BOARD ASSEMBLY
INSPECT HARD DISK DRIVE
REPLACED OPERATION