DYNAMIC RADAR CRUISE CONTROL SYSTEM


  1. OPERATION


    1. The combination meter assembly has a master warning light, cruise control indicator light (constant speed control mode), cruise control indicator light (vehicle-to-vehicle distance control mode), cruise SET indicator light, multi buzzer, and multi-information display to provide warnings and messages regarding the dynamic radar cruise control system.

    2. The multi-information display displays the set vehicle speed, vehicle ahead mark, and warning message.

    3. Examples are shown below for the illumination or display of each warning light or multi-information display.

      Constant Speed Control Mode
      Condition Multi-information Display* Master Warning Light Multi Buzzer
      Being Controlled B004Z5I - -
      System Check B004YXN Illuminates sounds

      *: These illustrations are examples.

      Vehicle-to-vehicle Distance Control Mode
      Condition Multi-information Display*1 Master Warning Light Multi Buzzer
      Precaution Display (Displayed for 6 sec. after ON-OFF button has been turned on.) B004ZCA - -
      Set Standby B004Z7Z B004Z0I - -
      Under Constant Speed Control (No Vehicle Ahead, Long) B004Z9W - -
      Under Follow-up Control (Vehicle Ahead, Long) B004Z6C - -
      Under Follow-up Control (The vehicle ahead moves away when the vehicle is being driven at approximately 40 km/h [25 mph] or less.)*2 B004Z9P - -
      The vehicle-to-vehicle distance mark and vehicle ahead mark blinks
      Approach warning (Vehicle Ahead) B004ZAZ - -
      The display frame, vehicle-to-vehicle distance mark and vehicle ahead mark blinks and the skid control buzzer sounds.
      Stop Retention Control*2 B004YXL - -
      Start Control*2 B004YYU - -
      The millimeter wave radar sensor assembly or the emblem are dirty B004Z3Y Illuminates sounds

      • Poor Weather Conditions

      • Brake control by the dynamic radar cruise controlsystem is temporarily unavailable.

      • The beam axis of the millimeter wave radar sensor assembly is being aligned.

      • The forward recognition camera is temporarily unavailable

      • A system check is being performed after the engine has started

      		 B004Z4F Illuminates sounds
      System Check B004YXN Illuminates sounds
      System Check During Stop Retention Control*2 B004ZBA Illuminates sounds
      The skid control buzzer sounds until the brake pedal is depressed.

      When any problem occurs during stop retention control, or any of the following conditions is met:


      • The driver seat belt is unfastened

      • The driver door is opened

      • The vehicle is parked for a long period of time

      • The vehicle is driving on a steep hill

      • A preceding vehicle is not detected

      		 B004YZ8 - -
      The skid control buzzer sounds until the brake pedal is depressed.

      *1: These illustrations are examples.

      *2: Models with full-speed range following function.