REAR SEAT ENTERTAINMENT SYSTEM Does not Connect to Rear-Miracast

PROCEDURE


  1. CHECK FOREIGN OBJECT


    1. Check that there are no metallic objects placed in front of the front surface of the disc player assembly.

      OK
      No foreign matter
      Result
      Proceed to
      OK
      NG

    NG

    REMOVE FOREIGN OBJECT AND RECHECK

    OK

  2. CHECK DEVICE


    1. Check whether the customer's device supports "Miracast" functionality.

      Tech Tips

      For supported devices, Click here

      Result
      Result Proceed to
      The customer's device supports "Miracast" functionality A
      The customer's device does not support "Miracast" functionality B

    B

    CHECK USING ANOTHER "Miracast" COMPATIBLE DEVICE

    A

  3. CHECK DEVICE SETTINGS


    1. Check whether the "Miracast" functionality is set to "On" in the settings of the customer's device.

      Tech Tips


      • "Miracast" is normally set to "Off" by default. As a result, the setting must be manually changed to "On".

      • The operation method differs depending on the device. The name "Miracast" also refers to "Screen Mirroring" and "Media Output", etc.

      Result
      Result Proceed to
      "Miracast" functionality is set to "On" in the settings of the customer's device A
      "Miracast" functionality is not set to "On" in the settings of the customer's device B

    B

    CHECK AFTER TURNING "Miracast" FUNCTIONALITY TO "ON"

    A

  4. CHECK DISC PLAYER ASSEMBLY SETTING


    1. Check that the "Wi-Fi power" setting is "On" in the "Wi-Fi" settings on the television display.

    2. Check that the "Access to network" setting is "Off" in the "Wi-Fi" settings on the television display.*


      • *: w/ "Wi-Fi" (Station) Function

    3. Check that the "Bluetooth power" setting is "Off" on the multi-display.

      Tech Tips

      Bluetooth and "Miracast" and "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, the connection may suffer from outages due to radio interference if connecting simultaneously.

      Result
      Proceed to
      NEXT

    NEXT

  5. CHECK CONNECTION RESULT


    1. Check connection:


      1. Check the connection between the device and "Miracast" on the television display in the vehicle and on the device itself.

      2. Allow Miracast video to be streamed to the television display and wait for 15 seconds.

      3. Check that the smart phone screen is displayed on the television display.

      Tech Tips

      If the "Miracast" connection cannot be established even after checking, confirm the connection again.

      Result
      Result Proceed to
      Smartphone screen is displayed on the television display A
      "Miracast" connection cannot be established even after performing the above connection check twice B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

  6. CHECK USING ANOTHER DEVICE


    1. Check using another "Miracast" supported device.

      Result
      Result Proceed to
      Established connection with "Miracast" A
      Could not establish connection with "Miracast" B

    A

    END (DEVICE IS DEFECTIVE)

    B

    REPLACE DISC PLAYER ASSEMBLY Click here