HEADLIGHT ASSEMBLY(for LED Headlight) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 1 HEADLIGHT BULB


    1. A01L8BXC01
      B0069FO Counterclockwise

      Turn the No. 1 headlight bulb counterclockwise until the bulb stops.

    2. Remove the No. 1 headlight bulb from the headlight unit.

      Note

      Do not touch the glass part of the No. 1 headlight bulb.

  2. REMOVE FRONT TURN SIGNAL LIGHT SOCKET

    A01LA20C01
    *a Matchmark
    *b Unlock Position Mark
    B0069FO Counterclockwise

    1. Turn the front turn signal light socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the front turn signal light socket from the headlight unit.

  3. REMOVE FRONT TURN SIGNAL LIGHT BULB


    1. A01LEGAC01
      B0069FO Push
      B0068NX Counterclockwise
      A01LA3O Remove in this Direction

      Push the front turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the front turn signal light socket.

  4. REMOVE HEADLIGHT LEVELING MOTOR LH


    1. A01L9X5C01
      *a Aiming Screw
      B0069FO Loosen in this Direction

      Loosen the aiming screw 20 rotations.

    2. A01LFBEC01
      *a Aiming Screw
      B0069FO Loosen in this Direction
      B0068NX Counterclockwise

      Turn the headlight leveling motor LH counterclockwise and remove it.

      Note


      • Do not pull excessively as the headlight unit and headlight leveling motor LH are connected at this time.

      • Turn while holding with one hand as the headlight leveling motor LH may jump out.

      • If the headlight leveling motor LH is removed, make sure to replace the headlight leveling motor base packing with a new one.

      Tech Tips

      For the headlight assembly RH, turn the headlight leveling motor RH clockwise to remove it.

    3. Loosen the aiming screw of the headlight leveling motor LH until the headlight unit is disconnected.

      Tech Tips

      Count and record the number of rotations before the headlight unit and headlight leveling motor LH are disconnected.

  5. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING


    1. A01LFEM

      Remove the headlight leveling motor base packing from the headlight unit.

      Note

      If the headlight leveling motor base packing is removed, replace it with a new one.