STARTER INSTALLATION

PROCEDURE

1. INSTALL FLYWHEEL HOUSING SIDE COVER

2. INSTALL STARTER ASSEMBLY

   1. Install the starter with the 2 bolts.

      37 N*m

      377 kgf*cm

      27 ft.*lbf

   2. Connect the starter connector.

   3. Connect the starter wire with the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

   4. Attach the starter wire clamp.

3. INSTALL STARTER COVER

   1. Install the starter cover with the 3 bolts.

      12 N*m

      117 kgf*cm

      8 ft.*lbf

4. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH

   (Click here)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick here).