PURGE VALVE INSPECTION

PROCEDURE

  1. INSPECT PURGE VSV

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      20°C (68°F)

      23 to 26 Ω

      1 - VSV body

      Always

      10 MΩ or higher

      2 - VSV body

      Always

      10 MΩ or higher

    2. Check the operation of the purge VSV.

      1. A211314C03

        *a

        Does not flow

        Check that air does not flow from port E to port F.

      2. A211315C03
        V100135

        Air

        Apply battery voltage to terminals 1 and 2.

      3. Check that air flows from port E to port F.

        If the result is not as specified, replace the purge VSV.