INJECTOR DRIVER (w/ EGR Cooler) INSTALLATION


  1. INSTALL INJECTOR DRIVER BRACKET


    1. A01DY1Y

      Install the driver bracket with the 3 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }
  2. INSTALL INJECTOR DRIVER


    1. A01E2DJ

      Install the injector driver with the 2 bolts.

      Torque:
      12.5 N*m  { 128 kgf*cm, 9 ft.*lbf }
    2. Connect the 3 connectors.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  5. READ REGISTERED DATA


    1. Read the registered data Click here.