STOP LIGHT SWITCH INSPECTION

PROCEDURE

  1. INSPECT STOP LIGHT SWITCH ASSEMBLY

    1. E200528C01

      *1

      Pin

      *a

      Not Pushed

      *b

      Pushed

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 - 2

      Pin pushed

      10 kΩ or higher

      Pin not pushed

      Below 8.3 Ω

      3 - 4

      Pin pushed

      Below 1.6 Ω

      Pin not pushed

      10 kΩ or higher

      If the result is not as specified, replace the stop light switch assembly.