DIFFERENTIAL PRESSURE SENSOR REMOVAL

PROCEDURE

1. REMOVE NO. 1 ENGINE COVER

   Click here

2. REMOVE DIFFERENTIAL PRESSURE SENSOR

   1. 

      Slide the white-colored lock of the differential pressure sensor connector as shown in the illustration to release it and disconnect the differential pressure sensor connector.

      Table 1. Text in Illustration

      *a	White-colored Lock
      *b	Slide
      *c	Push

   2. 

      Using a T20 "TORX" socket wrench, remove the screw and differential pressure sensor.

   3. Disconnect the 2 No. 1 vacuum transmitting hoses.

   4. Remove the 2 No. 1 vacuum transmitting hoses from the differential pressure sensor.