POWER SEAT CONTROL ECU INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY

    1. Install the position control ECU and switch assembly with the 3 screws.

  2. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  4. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  5. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD LH

    Click here

  6. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  7. INSPECT FRONT POWER SEAT CONTROL SYSTEM

    Click here