FRONT DRIVE SHAFT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT AXLE ASSEMBLY LH

    Click here

  2. REMOVE FRONT AXLE ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  3. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH


    1. A004SILE01

      Using SST, remove the front drive shaft.

      SST
      09520-00031
      09520-01010

      Note


      • Be careful not to damage the transaxle case oil seal, inboard joint boot or drive shaft dust cover.

      • Be careful not to drop the drive shaft.

  4. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH


    1. A004OPA

      Remove the 2 bolts and pull out the drive shaft together with the drive shaft bearing case.

    2. Remove the drive shaft from the transaxle.

      Note


      • Be careful not to damage the inboard joint boot and drive shaft dust cover.

      • Be careful not to drop the drive shaft.

  5. REMOVE FRONT DRIVE SHAFT HOLE SNAP RING LH

    A004TZK

    Using a screwdriver, remove the hole snap ring.