OIL PRESSURE SWITCH INSPECTION

PROCEDURE

  1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

    1. Disconnect the engine oil pressure switch assembly connector.

    2. Start the engine.

    3. A159695

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - Switch body

      Idling

      10 kΩ or higher

      1 - Switch body

      Engine stopped

      Below 1 Ω

      If the result is not as specified, replace the engine oil pressure switch assembly.

    4. Connect the engine oil pressure switch assembly connector.