RELAY(for Windshield Deicer) ON-VEHICLE INSPECTION

PROCEDURE

  1. REMOVE DEICER RELAY

    1. Remove the deicer relay from the engine room relay block.

  2. INSPECT DEICER RELAY

    B453701E01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      3 - 5

      Battery voltage not applied to terminals 1 and 2

      10 kΩ or higher

      3 - 5

      Battery voltage applied to terminals 1 and 2

      Below 1 Ω

      If the result is not as specified, replace the relay.

  3. INSTALL DEICER RELAY

    1. Install the deicer relay to the engine room relay block.