ELECTRICAL KEY OSCILLATOR(for Front Floor) INSTALLATION

PROCEDURE

1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   1. Connect the connector.

   2. Engage the clamp to install the No. 1 indoor electrical key antenna assembly.

      Note:

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

   Click here