STEERING PAD SWITCH REMOVAL

PROCEDURE

  1. REMOVE HORN BUTTON ASSEMBLY

    Click here

  2. REMOVE STEERING PAD SWITCH ASSEMBLY

    1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.

    2. w/ Shift Paddle Switch Wire of Steering Pad Switch Assembly:

      1. C278689C01

        *1

        No. 1 Switch Wire

        Disengage the steering pad switch connector clamp from the lower steering wheel boss cover.

    3. w/ Shift Paddle Switch:

      1. Disconnect the No. 1 switch wire.

    4. C273111C02

      *a

      Pin

      *b

      Guide

      Remove the 2 screws.

    5. Disengage the 4 claws, 2 pins and 2 guides to remove the steering pad switch assembly from the steering wheel sub-assembly.