BRAKE BOOSTER(for RHD) REASSEMBLY

PROCEDURE

1. INSTALL VACUUM SENSOR ASSEMBLY (w/ Stop and Start System)

   1. Install a new check valve grommet to the brake booster assembly.

   2. 

      *a	35.7° +/- 4°
      	Up

      Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.

      Note:

      • Push the area (A) when installing the vacuum sensor assembly.

      • Do not push the area (B) when installing the vacuum sensor assembly.

2. INSTALL CHECK VALVE GROMMET

   1. Install a new check valve grommet to the brake booster assembly.